Page 1 of 1
Computers current status?
Posted: Tue Mar 30, 2021 12:39 am
by zck113
I've been trying to find a way to check if the computer is on or not. I saw a card in the setup page for p2r that showed something like that using cast, but I can't figure out what the whole command actually is.
was that just a test card or does it work?
thanks for any feedback
Re: Computers current status?
Posted: Tue Mar 30, 2021 8:23 am
by RobLatour
Yes, it works.
Here is the Push2Run card that I use:
Some notes:
1. cast needs to be installed for this to work, if you don't have it you can get it from here:
https://www.rlatour.com/cast/
2. I set my IFTTT applet up as per the setup instructions on the Push2Run website, with the IFTTT applet listening for:
tell my computer to $
and
ask my computer to $
3. the device name in the attached Push2Run card would need to be changed for your setup
4. if you don't include the device name, cast will broadcast the confirmation message to all your devices
5. I've found, for whatever reason, somewhere within Google or IFTTT commands with the word "if" in them are not handled very well.
Accordingly, what I say is:
OK Google ask my computer to confirm that it is on
(which works reliably) as opposed to
OK Google ask my computer if it is on
(which does not work reliably).
6. Finally, when you say
OK Google ask my computer to confirm that it is on
then if your computer is on you should hear a response that it is on,
if you don't hear a response either your computer is not on or something is broken
Hope this helps
Re: Computers current status?
Posted: Tue Mar 30, 2021 9:48 am
by zck113
running into an issue where I am unable to import cards.
It shows as a .p2r file, not zip, and i can't drag/drop either.
Any ideas? Still pretty new to using p2r, not sure if this is user error hahah
Code: Select all
2021-03-30 06:42:08.030 - Importing started
2021-03-30 06:42:08.030 - Importing to database from C:\Users\Mxthic\Downloads\Put computer to sleep.p2r
2021-03-30 06:42:08.032 - Import failed - most likely the Import file is in the wrong format
2021-03-30 06:42:11.909 - Importing started
2021-03-30 06:42:11.910 - Importing to database from C:\Users\Mxthic\Downloads\Confirm_computer_is_running.p2r
2021-03-30 06:42:11.910 - Import failed - most likely the Import file is in the wrong format
2021-03-30 06:42:21.950 - Importing started
2021-03-30 06:42:21.951 - Importing to database from C:\Program Files\Push2Run\Confirm Computer is Running.p2r
2021-03-30 06:42:21.952 - Import failed - most likely the Import file is in the wrong format
Re: Computers current status?
Posted: Tue Mar 30, 2021 10:30 am
by RobLatour
What happens when you double click on the file?
Re: Computers current status?
Posted: Tue Mar 30, 2021 10:38 am
by zck113
Nothing.
Cursor turns to loading circle for half second then nothing.
Re: Computers current status?
Posted: Tue Mar 30, 2021 11:32 am
by RobLatour
Interesting, if you are not already running the most current version of the program (v3.5.3) can you please upgrade to it. Also, when installing there is an option to associate .p2r files with Push2Run, can you please ensure that is checked.
Also, here is a screenshot of the window:
- confirm.jpg (102.84 KiB) Viewed 2580 times
Re: Computers current status?
Posted: Tue Mar 30, 2021 11:46 pm
by zck113
Hey I appreciate the quick support on this, seriously.
Great program, even with the hiccups. Shit happens, and honestly most times its my fault
So I did have latest ver installed, and I did ensure that button was checked when I installed initially.
I was able to setup the card via the picture you shared, and I was able to use voice via google assistant to send a request via dropbox to p2r. It received it, and ran cast that then told me the computer was on, on my computer.
I was under the assumption this would tell my phone, if the computer was on. Am I on the wrong road here?
still unable to import cards, but I can export one? or is it the whole set?
again, problem most likely exists between seat and keyboard but I appreciate the help regardless
Re: Computers current status?
Posted: Fri Apr 02, 2021 11:56 am
by RobLatour
Cast will only be able to cast to online device that support chromecasting; for example a google mini, home, nesthub, etc.
Even if your phone has google assistant on it, it will likey not work.
To see what you can cast to in your network, enter the following windows command line commands:
c:
cd \
cd program files
cd cast
cast -inventory
If you want to notify yourself on your phone, you will likely need to change Push2Run to send you and e-mail or text.
Here is how someone else is using the program to send texts
viewtopic.php?t=921
if you want to send an email you will need a command line email program.
If this is not up your alley I can do some research for you and send instructions.
Your importing of cards is a separate issue, but lets deal with that after we get your notification working.