A Viewer for Windows, ESP32 Projects, Cast, NotifyOnDemand, Push2Run and SetVol

Posted: **Sat Nov 02, 2019 1:39 am**

IFTT have changed thier website from whats documented - the instructions need updating.
Also IFTTT pushbullet plugin now includes two fields :

: pushbulllet.png (164.17 KiB) Viewed 3170 times

An no matter which combination I use - push2go always says "Title did Not match Push2Run's title filter"

Log:
2019-11-02 11:20:39.330 - Push2Run version 2.4.0.0 started
2019-11-02 11:20:39.418 - Windows UAC notify feature is on
2019-11-02 11:20:39.423 - Normal privileges are in effect
2019-11-02 11:20:39.993 - Current network adapter is Ethernet 3
2019-11-02 11:20:40.293 - Network status is up
2019-11-02 11:24:24.653 - Connection with Pushbullet established
2019-11-02 11:24:26.077 - Request to Pushbullet to keep account active (ok)

2019-11-02 12:37:30.909 - Incoming push ...
2019-11-02 12:37:30.910 - <Title> Google Assistant Commands
2019-11-02 12:37:30.910 - <Body> open the calculator
2019-11-02 12:37:30.911 - Title did Not match Push2Run's title filter - no further action will be taken

2019-11-02 12:38:53.089 - Incoming push ...
2019-11-02 12:38:53.090 - <Title> Google Assistant Commands
2019-11-02 12:38:53.090 - <Body> open the calculator
2019-11-02 12:38:53.090 - Title did Not match Push2Run's title filter - no further action will be taken

2019-11-02 12:40:28.708 - Incoming push ...
2019-11-02 12:40:28.709 - <Title> Google Assistant Commands
2019-11-02 12:40:28.712 - <Body> open the calculator
2019-11-02 12:40:28.715 - Title did Not match Push2Run's title filter - no further action will be taken

2019-11-02 12:44:35.802 - Incoming push ...
2019-11-02 12:44:35.802 - <Title> open the calculator
2019-11-02 12:44:35.803 - <Body> open the calculator
2019-11-02 12:44:35.805 - Title did Not match Push2Run's title filter - no further action will be taken

2019-11-02 12:45:33.315 - Incoming push ...
2019-11-02 12:45:33.316 - <Title> open the calculator
2019-11-02 12:45:33.318 - <Body> open the calculator
2019-11-02 12:45:33.322 - Title did Not match Push2Run's title filter - no further action will be taken

2019-11-02 12:45:54.273 - Incoming push ...
2019-11-02 12:45:54.274 - <Title> open the calculator
2019-11-02 12:45:54.274 - <Body> open the calculator
2019-11-02 12:45:54.275 - Title did Not match Push2Run's title filter - no further action will be taken

2019-11-02 13:22:17.143 - Incoming push ...
2019-11-02 13:22:17.144 - <Title> open the calculator
2019-11-02 13:22:17.144 - <Body>
2019-11-02 13:22:17.149 - Title did Not match Push2Run's title filter - no further action will be taken

2019-11-02 13:24:37.162 - Incoming push ...
2019-11-02 13:24:37.163 - <Title> open the calculator
2019-11-02 13:24:37.166 - <Body>
2019-11-02 13:24:37.169 - Title did Not match Push2Run's title filter - no further action will be taken

2019-11-02 13:28:43.356 - Incoming push ...
2019-11-02 13:28:43.356 - <Title> PC P2GOp
2019-11-02 13:28:43.359 - <Body> open the calculator
2019-11-02 13:28:43.364 - Title did Not match Push2Run's title filter - no further action will be taken

2019-11-02 13:30:32.955 - Incoming push ...
2019-11-02 13:30:32.956 - <Title> open the calculator
2019-11-02 13:30:32.958 - <Body> open the calculator
2019-11-02 13:30:32.962 - Title did Not match Push2Run's title filter - no further action will be taken

The Listen for field is set to "open the calculator".

Help appreciated!

Posted: **Sat Nov 02, 2019 7:16 am**

Thanks for the heads up on the IFTTT changes - I'll take a look.

Regarding matching your title filter ...

It's best to use a title that more or less identifies the computer that you will be having Push2Run run on. Below in one example you had used:

PC P2GOp

which I suspect is good enough, assuming your PC's name is P2GOp. However, in the screenshot you provided you were using 'textfield' which is not what is needed at all (I appreciated you much have changed this a few times in the search for the right combination - so no worries).

However, for the IFTTT Pushbullet Title field, the setup instructions say to use 'Push2Run xxx' where xxx is your computer name. In the example on the website it says I use 'Push2Run ROBSPC' as my computer's name is 'ROBSPC'. If you want to use 'PC P2GOp' then ok ...

However, regardless of what you use, please make sure the title filter on your iFTTT card invoking Pushbullet is the exact same as the one set in your Push2Run - Main window - Actions - Options - Pushbullet - Title filter field. Can you please double-check that is the case?

Additionally, if you have a zero (0), a letter O, a 1, a lower case L (l), or upper case i (I), in your computer name please make sure to use the same in both your options title filter and your ifttt note title - it really easy to mix things like that up, and best to copy and paste just in case.

I'm guessing the above will resolve your problem with the matching, please let me know.

Posted: **Sat Nov 02, 2019 11:42 am**

The help has been now updated to reflect the recent changes with IFTTT website - thanks again for pointing this out

Posted: **Sat Nov 02, 2019 3:08 pm**

So I can't find "Say a phrase with a text ingredient" anywhere onthe IFTT website. If the setup instructions have been updated I don't know what to do next.

Posted: **Sat Nov 02, 2019 8:09 pm**

It is there for me when I try it;

ifttt.com
click on the outline of a person's head (top right)
click 'create'
click 'if this'
enter 'google'
click 'google assistant'
click ''say a phrase with a text ingredient'

A Viewer for Windows, ESP32 Projects, Cast, NotifyOnDemand, Push2Run and SetVol

Changes to IFTT Website broken push2run

Changes to IFTT Website broken push2run

Re: Changes to IFTT Website broken push2run

Re: Changes to IFTT Website broken push2run

Re: Changes to IFTT Website broken push2run

Re: Changes to IFTT Website broken push2run