Page 4 of 6

Re: Pushbullet - Websocket error - call to SSPI failed

Posted: Wed Feb 27, 2019 10:06 pm
by RobLatour
Push2Run has now been updated to version 2.1.2 - with this update, the program will now connect to Pushbullet using the TLS 1.2 protocol as required by recent Pushbullet changes.

You are welcome to download and install the program from the website ( www.push2run.com ). You may need to refresh your browser (F5) to see the new file version listed at the top of the page.

Version 2.1.2 also contains some other minor changes, I will put a post up in a few minutes to describe them as well. ** EDIT: done posted here

Hopefully, this will put everyone back in business.

I've personally missed using Push2Run over that last little while, and am very glad to have it back up and running!

Re: Pushbullet - Websocket error - call to SSPI failed

Posted: Wed Feb 27, 2019 10:17 pm
by saishowaguu2
Webpage shows update, but download is still 2.1.1
(Also cannot detect new update from within existing installed program)

Re: Pushbullet - Websocket error - call to SSPI failed

Posted: Wed Feb 27, 2019 10:38 pm
by RobLatour
Please refresh your browser (usually F5) and you should see the top line of the web page read "Push2Run (v2.1.2 - February 27, 2019)"

If you are seeing that, but not getting version 2.1.2 on download that may be due to some caching someplace and you may have better luck with this direct link instead:
https://6ec1f0a2f74d4d0c2019-591364a760 ... nSetup.exe

Re: Pushbullet - Websocket error - call to SSPI failed

Posted: Thu Feb 28, 2019 12:21 am
by thewizkid95
Resolved! Thanks for the great support!

Side note, very minor issue: Admim is misspelled in Add/Change :P
Capture.PNG
Capture.PNG (5.52 KiB) Viewed 5995 times

Re: Pushbullet - Websocket error - call to SSPI failed

Posted: Thu Feb 28, 2019 12:43 am
by aurelbdx
Thank Rob :)
Now it works great and I installed it without problem.

Re: Pushbullet - Websocket error - call to SSPI failed

Posted: Thu Feb 28, 2019 5:57 am
by CurryBay
Thanks Rob for fixing this issue. Just a note that the new update is still not detected within the 2.1.1 app when checking for updates. Wouldn't have known there was a new version if I hadn't had the issue with pushbullet!

Re: Pushbullet - Websocket error - call to SSPI failed

Posted: Fri Mar 01, 2019 8:08 am
by alexcoman
Having the exact same problem. It was working a few days ago, now it's not.

Re: Pushbullet - Websocket error - call to SSPI failed

Posted: Fri Mar 01, 2019 7:40 pm
by aurelbdx
@alexcoman: did you update Push2Run with v2.1.2 ?

http://www.push2run.com/Push2RunSetup.exe

Re: Pushbullet - Websocket error - call to SSPI failed

Posted: Tue Mar 12, 2019 1:38 pm
by Zachary88
Hello, I'm using push2run for Tidal with Google assistant. And I've found this topic because my push2run after updated to 2.1.2 still have no connection to Pushbullet. I have no idea after a lot of restarts and administrator rights... No connection.

Wepsocket error
HTTP/1.1 401 Unauthorized
Websocket closed

Greetings
Zachary

Re: Pushbullet - Websocket error - call to SSPI failed

Posted: Tue Mar 12, 2019 3:52 pm
by RobLatour
Zachary88: Can you access this link from your browser:

https://stream.pushbullet.com/