2.1.1 and 2.1 not connecting to Pushbullet

[jony]

I recently upgraded my 2.0.5 to 2.1.1 on Win 10 and at first it worked fine. But after a few hours it stopped connecting to PushBullet. It's been about a day and I am still unable to connect at all. Here is my log output when I first run the program:

2019-02-24 14:29:00.349 - Started

2019-02-24 14:29:00.470 - Network status is up

2019-02-24 14:29:02.164 - Websocket error
2019-02-24 14:29:02.266 - A call to SSPI failed, see inner exception.
2019-02-24 14:29:02.368 - Websocket closed

2019-02-24 14:29:02.623 - Connection with Pushbullet not established

2019-02-24 14:29:03.622 - Attempting to reconnect to Pushbullet
2019-02-24 14:29:03.888 - Websocket error
2019-02-24 14:29:03.889 - A call to SSPI failed, see inner exception.
2019-02-24 14:29:03.889 - Connection with Pushbullet not established
2019-02-24 14:29:03.889 - Websocket closed

I spent a bit of time troubleshooting and found no faults with IFTTT and PushBullet.

At that point, I turned my attention to the version upgrade and found myself on the forums. As a quick fix, I decided to try downgrading to the publicly posted 2.1. No dice. I then realized I had a copy of 2.0.4, so I installed that. Still no dice. Strange, I thought.

Then I figured it could be a configuration issue. So I went to AppData\Roaming\Push2Run and replaced the db with the 2.0.5 backup copy from before the upgrade to 2.1.1. Nope. Finally, I decided to completely delete the AppData\Local\Rob_Latour directory. Still nope.

Are there other configuration changes or something else I can try here? Thanks.

[RobLatour]

please see: https://www.push2run.com/phpbb/viewtopic.php?f=5&t=668